Standards

A cut-resistant glove being drawn against a straight test blade on a lab tomodynamometer, illustrating the ANSI TDM-100 cut test

ansi cut levels

·

ANSI Cut Levels Explained: A1–A9 (ANSI/ISEA 105) and How to Read Them

12 min read

A worker in a full-body harness tied off near the unprotected edge of an elevated concrete deck on a construction site

fall protection

·

When Is Fall Protection Required? OSHA Trigger Heights by Industry (2026)

16 min read

High-visibility safety vest and reflective tape laid out on a concrete jobsite floor, showing fluorescent background fabric and silver retroreflective stripes

hi vis

·

ANSI/ISEA 107 Explained: Hi-Vis Class 1, 2 & 3 and Type O/R/P

15 min read

Close-up of the rectangular ASTM F2413 marking stamped inside the tongue of a steel-toe work boot

astm f2413

·

ASTM F2413 Explained: Decoding the Safety-Toe Boot Marking (I/75, C/75, EH, Mt, PR, SD)

14 min read

Close-up of a work boot outsole and heel on a concrete floor next to an electrical panel, illustrating electrical hazard footwear

eh rated boots

·

EH-Rated Work Boots: What "Electrical Hazard" Actually Protects You From

19 min read

A worker tied off on a steel structure with a self-retracting lifeline overhead, showing the vertical drop distance below to the next level

fall clearance calculation

·

Fall Clearance: How to Calculate It (and Why Workers Still Hit the Ground)

20 min read